Code-3 XCEL Bedienungsanleitung PDF herunterladen (Seite 8)

WARNING

Connection of a 58 watt speaker to the siren amplier will cause the speaker to burn out, and will void the speaker

warranty!

WARNING

Any electronic device may create or be affected by electromagnetic interference. After installation of any electronic

device, operate all equipment simultaneously to insure that operation is free of interference.

WARNING

Utilizing non-factory specied screws and/or mounting brackets and/or the improper number of screws may result in

failure of the mounting system and severe damage to the vehicle as well as loss of warranty coverage on the equipment.

Amplier Power Distribution

The Level 1, 2, 3A and 3B outputs can supply a maximum of 15 Amps each or a combined total of 50 Amps. Each Level has a 20 Amp fuse installed

inside the Amplier. Fuses may be accessed through the panel on top of the Amplier.

The Auxiliary outputs A, B, C, D, E, and F can supply a maximum of 10 amps each or a combined total of 60A. Auxiliary outputs A, B, C, D, E, and F

have 15 amp fuses. Fuses may be accessed through the panel on top of the Amplier.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

Code-3 XCEL Bedienungsanleitung Seite 8