Code-3 300 Series Beacon Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Code-3 300 Series Beacon herunter. Code 3 300 Series Beacon User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 8
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
INSTALLATION
&OPERATION
MANUAL
MODEL
310
TM
MODEL 310
TM
SINGLE LAMP REVOLVING BEACON
Contents:
IMPORTANT:
Read all instructions and warnings before installing and using.Read all instructions and warnings before installing and using.
Read all instructions and warnings before installing and using.Read all instructions and warnings before installing and using.
Read all instructions and warnings before installing and using.
INSTALLER: INSTALLER:
INSTALLER: INSTALLER:
INSTALLER:
This manual must be delivered to the end user of this equipment. This manual must be delivered to the end user of this equipment.
This manual must be delivered to the end user of this equipment. This manual must be delivered to the end user of this equipment.
This manual must be delivered to the end user of this equipment.
Introduction (with warnings) ............................... 2
Unpacking & Pre-Installation .............................. 2
Wiring Instructions .............................................. 2
Mounting Instructions/Warnings ......................... 3
Maintenance.........................................................4
Parts List (Replacement Parts/Exploded View)... 5
Warranty.............................................................. 6
Seitenansicht 0
1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - MODEL 310

INSTALLATION&OPERATIONMANUALMODEL310TMMODEL 310 TMSINGLE LAMP REVOLVING BEACONContents:IMPORTANT:Read all instructions and warnings before install

Seite 2 - Installation & Mounting

IntroductionThe 310TM beacon has a single rotating warning signal which exceeds, by several times, the SAE standards setfor rotating warning lights, a

Seite 3 - Permanent-Resilient Mounting

1) Rust Stains: The magnetic mount is not intended as a permanent mounting for thebeacon. Long duration usage of any magnet will expose the high iro

Seite 4 - H-1 55 WATT REFLECTOR

Lamps are extremely hot! Allow to cool completely before attempting to remove. Glovesand eye protection should be worn when handling halogen lamps a

Seite 5 - Parts & Exploded Views

NOTE: Removal of reflector assembly from gear/shaft/plate assembly is not necessary for partial disassembly of unit or general maintenance.

Seite 6

6NOTES

Seite 7

7NOTES

Seite 8 - Trouble Shooting Guidelines

310 and PSE AMBER are trademarks of Public Safety Equipment, Inc.Revision 4, 3/2008 - Instruction Book Part No. T07843©2008 Public Safety Equipment,

Kommentare zu diesen Handbüchern

Keine Kommentare