Code-3 DeckBlaster Bedienungsanleitung PDF herunterladen (Seite 7)

Unit does not flash. No power connected to unit. Connect unit to power.

Blown fuse. (External) Check user-installed fuse.

Replace with properly sized fuse.

Worn flashtube or halogen lamp.

Replace flashtube or halogen lamp

with recommended replacement.

Circuit board failure. Replace circuit board assembly

Reversed polarity on power. or send unit in for service.

Unit flashes intermittently Loose connection in wiring. Check wiring for loose connection.

Flashtube installed incorrectly. Check flashtube for proper instal-

lation as illustrated in Fig. 6.

Worn flashtube or halogen lamp. Replace flashtube or halogen

lamp with recommended replace-

ment.

Light output appears dim. Dirty lens. Clean lens.

Voltage drop in wiring. Check power wire sizing. Replace

with larger wire to reduce voltage

drop.

Worn flashtube or halogen lamp

Replace flashtube or halogen lamp

with recommended replacement.

Flashrate not correct Low input voltage. Check input voltage to unit and

make sure it is between 10 and

16 VDC.

PROBLEM PROBABLE CAUSE REMEDY

Troubleshooting

Deckblaster Parts List (Remote Model)Ref No. Description Part No.

Qty.

1 Upper Case Half T06570 1

2 Reflector Bracket S35321 1

3 Wiring - Straight Cord S35250 1

4 Reflector S81231 1

5 Flashtube S82108 1

6 Lens - Half w/Optics T0202X 2

- Half smooth T0204X 2

- Full w/Optics T0203X 1

- Full smooth T0206X 1

7 Lower Case Half T06571 1

8 Case Screws - #8x1/2", "B", Hex, Philips T00238 4

Not Shown Mounting bracket/Tether Cord Kit S65492 1

Rear-Deck Mounting Kit (Optional) RDMNT

Hook and Loop Mounting Kit (Optional) HLMNT

Suction-Cup Mounting Kit (Optional) SCMNT

1 2 3 4 5 6 7 8 9 10

Kommentare zu diesen Handbüchern

Keine Kommentare

Code-3 DeckBlaster Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Code-3 DeckBlaster