Code-3 OsciLaser Retrofit Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Code-3 OsciLaser Retrofit herunter. Code 3 OsciLaser Retrofit User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 4
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Contents:
Installation & Mounting ............................................ 2-3
Product Returns ....................................................... 4
OSCILASER
RETROFIT KIT
INSTALLATION
& OPERATION
MANUAL
Read all instructions and warnings before installing and using.
INSTALLER: This manual must be delivered to the end user of this equipment.
IMPORTANT:
OLKIT
Seitenansicht 0
1 2 3 4

Inhaltsverzeichnis

Seite 1 - RETROFIT KIT

Contents:Installation & Mounting ... 2-3Product Returns ...

Seite 2

2Remove the reflector fromcarriage (save the 2 1/4 inchhex screws) and discard.Cut gray ground wireand discard.Desolder both wires atmotor, discard gr

Seite 3

3Install new reflector. Attachground jumper and positivefeed wire.Detail of solder joint showingdirection of wires.Note gap between ground wireand p

Seite 4 - PRODUCT RETURNS

LP6000 and XL5000 are trademarks and ArrowStik is a registered trademark of Code 3, Inc. a subsidiary of PublicSafety Equipment, Inc.3M is a registere

Kommentare zu diesen Handbüchern

Keine Kommentare