Code-3 Sprinter Bedienungsanleitung PDF herunterladen (Seite 13)

PROGRAMMING CAPABILITIES:

(Pass Code must be entered to make certain program adjustments,

Contact your dealer to obtain Pass Code if needed)

Item: Label: Operation: Activation: Description:

FEATURES THAT ARE PROGRAMMABLE:

1. Setting light switch functions

2. Selecting different siren Wail/Yelp tones

3. Selecting different 2nd siren tones

4. Selecting different Manual siren tones

5. Programming the EMERGENCY key functions

(Normally, the programming mode is Pass Code protected,

Contact your dealer to obtain Pass Code if needed)

ALT, PROGRAM Enters the program mode ALT & PROGRAM

of the control head. keys will lighted (If the Passcode is

not entered within

5 seconds, the unit

will return to the

idle condition)

Once the 4 digit

code is entered, the

controller will beep

and the ALT &

PROGRAM keys

will be lighted.

(Pressing CLEAR while in the programming mode

will exit programming without saving any

changes made during the programming session.)

PROGRAMMING STEP #1:

LIGHT SWITCH FUNCTIONS:

Beginning programming mode, the following keys will be illuminated:

, , ,PRIMARY, SEC, LIGHT Indicating Step #1 in Each key will light

programming mode. according to its

current program

state of operation.

STATES OF OPERATION:

#1 Alternate: LED on #3 Timed: LED fast ashing (0.25 sec.) If not lit, it could be

#2 Flashing: LED ashing (0.5 sec.) #4 Momentary: LED off set to momentary

(pressing a key will cycle it through the different states of operation) mode.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Code-3 Sprinter Bedienungsanleitung Seite 13