Code-3 710 and 711 Flashers Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Code-3 710 and 711 Flashers herunter. Code 3 710 and 711 Flashers User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 7
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
INSTALLATION &
OPERATION
MANUAL
MODELS 710 & 711
MULTIPLE MODE
FLASHERS
Contents:
Introduction......................................................... 2
Unpacking & Pre-Installation .............................. 2
Installation & Mounting ....................................... 2
Mounting Methods .......................................... 2
Terminal Functions ......................................... 3
Operation as a Headlight Flasher....................... 4
Flash Mode 1 Installation ............................... 4
Flash Mode 2 Installation ............................... 4
Wiring Diagram ................................................... 4
Testing the Circuits for Flasher Modes 1 and 2 .. 5
Operation as a Lightbar Flasher ......................... 5
Warranty ............................................................. 6
IMPORTANT:
MODELS 710 & 711 MULTIPLE
MODE FLASHERS
Read all instructions and warnings before installing and using.
INSTALLER: This manual must be delivered to the end user of this equipment.
Seitenansicht 0
1 2 3 4 5 6 7

Inhaltsverzeichnis

Seite 1 - OPERATION

INSTALLATION &OPERATIONMANUALMODELS 710 & 711MULTIPLE MODEFLASHERSContents:Introduction...

Seite 2 - Installation & Mounting

All devices should be mounted in accordance with the manufacturer's instructions andsecurely fasten to vehicle elements of sufficient strength to

Seite 3 - Terminal Functions:

WARNING !Larger wires and tight connections will provide longer service life for components. Forhigh current wires it is highly recommended that term

Seite 4 - Flash Mode 1 Installation

Operation as a Headlight Flasher (12v Operation only)Flash Mode 1 InstallationTo operate the Model 710 or 711 as a high beam headlight flasher, refer

Seite 5 - Mode 2 Test

Testing the Circuits for Headlight Flasher Modes 1 and 2.Mode 1 Test1) Install the 20 amp. fuse in the in-line fuse holder.2) Turn ON the switch for M

Seite 6

NOTES

Seite 7 - PRODUCT RETURNS

Code 3, Inc.10986 N. Warson RoadSt. Louis, Missouri 63114-2029—USAPh. (314) 426-2700 Fax (314) 426-1337www.code3pse.comRevision 10, 12/2005 - Instruc

Kommentare zu diesen Handbüchern

Keine Kommentare