Code-3 920-10TH Flashers Bedienungsanleitung PDF herunterladen (Seite 4)

3. Locate the connectors shown in Fig 1. Disconnect these connectors

and connect the flashers connectors in line. Fig 2.

Fig. 2

4. Mount the flasher in this area using two screws (user supplied).

5. Locate the DARK GREEN/RED, 16-guage control wire under the center

dash section. Fig 3

6. Connect this DARK GREEN/RED wire to a customer supplied switch (12V

activation).

Fig. 3

1 2 3 4 5 6 7 8

Keine Kommentare

Code-3 920-10TH Flashers Bedienungsanleitung Seite 4