Code-3 275 Series Beacon Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Code-3 275 Series Beacon herunter. Code 3 275 Series Beacon User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 8
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
INSTALLATION
& OPERATION
MANUAL
275/275AH/275ASH/
275AMH BEACON
Read all instructions and warnings before installing and using.
INSTALLER: This manual must be delivered to the end user of this equipment.
IMPORTANT:
Contents:
Introduction ........................................................ 2
Unpacking & Pre-Installation .............................. 2
Installation & Mounting ....................................... 2
Magnetic Mounting ........................................... 3
Permanent Mounting ........................................ 3
Wiring Instructions ............................................ 5
Maintenance ....................................................... 6
Drill Template............................................................ 7
Warranty ............................................................. 8
275 Beacon
12v MODELS
PERMANENT, MAGNETIC MOUNT
BEACONS
Seitenansicht 0
1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - 275 Beacon

INSTALLATION& OPERATIONMANUAL275/275AH/275ASH/275AMH BEACONRead all instructions and warnings before installing and using.INSTALLER: This manual m

Seite 2 - Installation & Mounting

2IntroductionThe 275 Beacon has a sleek, aerodynamtic profile and is a powerful mid-sized, magnetically or permanentlymounted warning device. This pro

Seite 3 - Permanent Mounting

31) Rust Stains: The magnetic mount is not intended as a permanent mounting for thebeacon. Long duration usage of any magnet will expose the high ir

Seite 4

4DRAIN SLOT TOWARD REAR OF VEHICLETIGHTENING TORQUE: 5 lb-inBOLT M6VEHICLE PANELSPRING WASHERNUT M6SUPPLIED MOUNTING GASKET.187in FEMALECONNECTOR (-).

Seite 5 - Wiring Instructions

5WARNING!!Larger wires and tight connections will provide longer service life for components. For highcurrent wires it is highly recommended that term

Seite 6 - Maintenance

6WARNING: RATED VOLTAGE IS INDICATED ON THE BACK OF REFLECTORDO NOT TOUCH GLASS PORTIONOF LAMP12v APPLICATIONS ONLYFIGURE 4MaintenanceDo not oil or gr

Seite 7 - Drill Template

7Drill TemplateFIGURE 5 NOT TO SCALE120.0°120.0°3X .250.4005.125

Seite 8 - PRODUCT RETURNS

Code 3 is a registered trademarks ofPublic Safety Equipment, Inc.Revision 1 5/03 - Instruction Book Part No. T07948©2002 Public Safety Equipment, Inc.

Kommentare zu diesen Handbüchern

Keine Kommentare