Code-3 NP 130 NightProbe Bedienungsanleitung PDF herunterladen

INSTALLATION

&OPERATION

MANUAL

NIGHTPROBE

PATENT PENDING

Read all instructions and warnings before installing and using.

INSTALLER: This manual must be delivered to the end user of this

equipment.

IMPORTANT:

TANT:

NP 130

NIGHTPROBE

Contents:

Introduction (with warnings).......................................2

Unpacking & Pre-Installation.....................................2

Installation & Mounting................................................2

Controller Installation................................................3

Wiring Instructions ......................................................3

Maintenance...................................................................4

Parts List (Replacement Parts/Exploded View) 5,6

Troubleshooting.........................................................7

Specifications.................................................................7

Warranty...........................................................................8

REMOTE CONTROLLED SPOTLIGHT

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - &OPERATION

INSTALLATION&OPERATIONMANUALNIGHTPROBEPATENT PENDINGRead all instructions and warnings before installing and using.INSTALLER: This manual must be

Seite 2 - Installation & Mounting

2The use of this or any warning device does not insure that all drivers can or will observe orreact to an emergency warning signal. Never take the ri

Seite 3 - IMPORTANT:

3Connect the red and black wires from the NightProbe spotlight as shown in Figure 2. Protect the circuitwith a 15 Amp fuse and use 14 awg (minimum) w

Seite 4 - Operation

4The Night Probe controller provides a four-position switch for lighthead movement and a push-on/push-offswitch for lamp control. The four-position s

Seite 5 - Parts & Exploded Views

5Parts & Exploded ViewsControl Module1110To Control ModuleTo Control ModuleCR2032 Type Battery

Seite 6 - Parts List

6Parts ListRef No. Description Part No. Qty.1 SMS,Pan Hd Phil. #8 x 1/2"lg 'PT' screw T06828 072 Lower Bulb Shell T06878 013 H-3 100W L

Seite 7 - Troubleshooting

7Troubleshooting Product does not activate a. No power to unit a. Check wiringb. Fuse blown b. Replace fusec. Ignition not on c. Turn on ignitiond. Co

Seite 8 - PRODUCT RETURNS

8WARRANTYCode 3, Inc.'s emergency devices are tested and found to be operational at the time ofmanufacture. Provided they are installed and oper

Kommentare zu diesen Handbüchern

Keine Kommentare

Code-3 NP 130 NightProbe Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Code-3 NP 130 NightProbe herunter. Code 3 NP 130 NightProbe User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Code-3 NP 130 NightProbe