Code-3 WingMan for Chevy Impala Bedienungsanleitung PDF herunterladen (Seite 14)

14

2006 Installation Instructions cont.

FIG. C

FIG. D

Insert the carriage bolt through the mounting

foot and rear deck. Place the fender washer

and lockwasher on the bolt and finger tighten.

Some compression of the rear deck may be

required for the carriage bolt to clear the hole.

Repeat for the second foot.

(Figure C shows the bar mounted with the feet

and brackets attached)

As shown in figures C & D, place the

WingMan

™

on the mounting feet, lining up the

protruding screws (on the WingMan bottom),

with the clearance holes on the mounting feet.

Attach a flat mounting bracket to the mounting

foot, using the supplied 1/4"x20 hardware.

Repeat for the second bracket. Attach the

WingMan

™

to the brackets, using the remaining

two 1/4"x20 screws. Fully tighten all hardware.

NOTE: FINGER TIGHTEN ALL HARDWARE.

1 2 ... 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare